When You're Done - Bissell ProHeat 7950 SERIES User Manual

Bissell self propelled deep cleaner user's guide
Hide thumbs Also See for ProHeat 7950 SERIES:
Table of Contents

Advertisement

TurboBrush
(Available on select models only)
Assembly
Unplug cleaner from the outlet before attaching TurboBrush. Attach
TurboBrush to the Flex Hose by pressing tool onto the Grip/Trigger
until button snaps into hole. Make certain tool is securely in place.
Use
Move the TurboBrush switch to the "BRUSH" position.
1.
This activates the brush when the unit is running.
Place the tool directly on the soiled surface. Apply
2.
downward pressure on the tool and pull towards you
while pulling trigger to spray cleaning solution.
Release the spray trigger and move the switch to the
3.
"SUCTION" position. Vacuum the area until no more
cleaning solution can be removed.
Repeat steps 1-3 until no more dirt can be removed.
4.
Caution: Do not overwet.

When You're Done

Disconnect the TurboBrush from the Flex Hose by pushing
1.
down on the button lock and pulling straight off.
Once removed from the Flex Hose, the TurboBrush can
2.
be cleaned.
A) Move the switch to the "SUCTION" position
B) Rinse under running water.
C) Check spray nozzle for dirt. If necessary, clean with
a soft bristle brush.
D) Replace TurboBrush in its special storage
location on the Tool Caddy in back.
(available on select models only)
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents