Turbobrush Assembly And Use; When You’re Done; Operations; Before You Clean Carpets - Bissell 1698 SERIES User Manual

TurboBrush
Unplug cleaner from the outlet before attaching TurboBrush. Attach
TurboBrush to the Flex Hose by pressing tool onto the grip/trigger
until button snaps into hole. Make certain tool is securely in place.
Move the TurboBrush switch to the "BRUSH" position.
1.
This activates the brush when the unit is running.
Place the tool directly on the soiled surface. Apply
2.
downward pressure on the tool and pull towards you
while pulling trigger to spray cleaning solution.
Release the spray trigger and move the switch to the
3.
"SUCTION" position. Vacuum the area until no more
cleaning solution can be removed.
Repeat steps 1-3 until no more dirt can be removed.
4.
Caution: Do not overwet.
When You're Done
Disconnect the TurboBrush from the Flex Hose by pushing
1.
down on the button lock and pulling straight off.
Once removed from the Flex Hose, the TurboBrush can
2.
be cleaned.
A) Move the switch to the "SUCTION" position
B) Rinse under running water.
C) Check spray nozzle for dirt. If necessary, clean with
D) Replace TurboBrush in its special storage

Operations

Before You Clean Carpets

Plan activities to give carpet time to dry.
1.
Remove easily moved furniture from the room (chairs,
2.
lamps, coffee tables, etc).
Vacuum thoroughly to pick up loose debris and pet hair
3.
before using the PowerWash ProHeat.
Plan your cleaning route to leave an exit path. It is best
4.
to begin cleaning in the corner farthest from your exit.
10
Assembly and Use
™
a soft bristle brush.
location on the handle front.