When You're Done; Machine Preparation - Bissell 1699 SERIES - 120V User Manual

When You're Done

Disconnect the TurboBrush from the flex hose by pushing
1.
down on the button lock and pulling straight off.
Once removed from the Flex Hose, the TurboBrush can
2.
be cleaned.
A Move the switch to the "SUCTION" position.
B Rinse under running water.
C Check spray nozzle for dirt. If necessary, clean with a soft
bristle brush.
D Replace TurboBrush in the special storage location on the
handle front. (on select models only)
Operations
Before You Clean Carpets
Plan activities to give carpet time to dry.
1.
Remove easily moved furniture from the room (chairs,
2.
lamps, coffee tables, etc).
V
acuum thoroughly to pick up loose debris and pet hair
3.
before using the ProHeat ClearView.
Plan your cleaning route to leave an exit path. It is best to
4.
begin cleaning in the corner farthest from your exit.

Machine Preparation

Set up the machine following instructions in
1.
The Features section, pages 6-11.
Use a BISSELL Advanced Cleaning Formula in the SmartMix
2.
tank.When cleaning carpets, stairs or upholstery, use clean
water in the SmartMix Tank for gentle cleaning or rinsing.
Choose the SmartMix setting to match the cleaning job.
3.
Set the ReadyTools switch to either Tools/PreTreat or Floor
4.
Cleaning.
11