Introduction; Preface; Typographical Conventions - DigiTrace TCONTROL-CONT-03 Manual

1.1 Preface

1.2 Typographical conventions

A
Caution
H
Note
Reference
Hexadecimal
number
This operating manual is addressed to the system manufacturer with adequate
technical background and PC related knowledge.
Please read this operating manual prior to commissioning the device. Keep
the manual in a place accessible to all users at all times. Your comments are
appreciated and may assist us in improving this manual.
All necessary settings are described in this operating manual. Should
problems be encountered during commissioning, please refrain from carrying
out any manipulations that are not described in the manual. Any such
intervention will jeopardize your warranty rights. Please contact the nearest
subsidiary or the head office.
Warning signs:
This symbol is used when there may be damage to equipment or
data if the instructions are ignored or not followed correctly!
Note signs:
This symbol is used when your special attention is drawn to a
remark.
v
This symbol refers to further information in other manuals,
chapters or sections.
Number types:
0x0010 A hexadecimal number is identified by „0x" preceding the actual
number (here: 16 decimal).

1 Introduction

5