Description of the device
1.2 CP 1616 communications processor
Properties
The RJ-45 connection board for the CP 1604 has 4 RJ-45 jacks for connecting end devices
or other network components. With the supplied 40-pin ribbon cable, the RJ-45 connection
board for CP 1604 is connected to the CP 1604.
The signals of the 4 RJ-45 jacks are connected to the integrated real-time switch on the CP
1604.
Apart from the RJ-45 connectors, there are also 2 LEDs (green and yellow) for each port.
Green LED
Yellow LED
1.2
CP 1616 communications processor
Appearance
The following figure shows the CP 1616 communications processor.
20
LED description
Meaning
Is lit if a connection is established (Link LED).
Is lit when sending and receiving (Activity LED).
Operating Instructions, 02/2017, C70000-G8976-C218-08
CP 1604 / CP 1616