Table of Contents
Advertisement
To be able to use the full functionality of the Web server, make the following settings in the
"Web" tab:
● Enable the Web server
● Set the language for the Web
● Enable automatic updates (optional)
Figure 4-2
Enable the Web server
As default in HW Config, the Web server is disabled. You enable the Web server in HW
Config.
In the properties dialog of the CP 1616:
● Select the "Enable web server on this module" check box
Set the language for the Web
Select a maximum of two of the installed languages available for display devices for the
Web.
CP 1604 / CP 1616
Operating Instructions, 02/2017, C70000-G8976-C218-08
Settings in HW Config, "Web" tab
Operating hardware
4.2 Web server
43
Hide quick links:
Advertisement
Table of Contents
