Web; Intro - Siemens SIMATIC NET CP 1604 Operating Instructions Manual

Operating hardware
4.2 Web server
Follow the steps outlined below:
1. Open the Properties page of the SIMATIC PC station in HW Config or NetPro.
2. Select the "Settings" tab.
3. Under "Report system error", select the "Call during "Save and Compile"" check box.
Figure 4-3
4.2.6 Web pages
4.2.6.1

Intro

Establishing a connection to the Web server
You establish a connection to the Web server by entering the IP address of the configured
CP 1616 in the address bar of the Web browser, for example http://192.168.1.158. The
connection is established and the "Intro" page opens.
Here, we will show you how the various Web pages might look based on examples.
46
Setting for "Report system error"
Operating Instructions, 02/2017, C70000-G8976-C218-08
CP 1604 / CP 1616