Satellite Receiver With A Vcr - Sony GRAND WEGA KDF-55XS955 Operating Instructions Manual

Setting Up the LCD Projection TV
Satellite Receiver
with a VCR
40
Disconnect all power sources before making any connections.
1
Connect the CATV cable to the single (input) jack of the splitter.
2
Using a coaxial cable, connect one of the splitter's two output jacks to
the LCD projection TV's CABLE jack.
3
Using a coaxial cable, connect the splitter's other output jack to the
satellite receiver's VHF/UHF IN jack.
4
Connect the satellite antenna cable to the satellite receiver's
SATELLITE IN jack.
5
Using a coaxial cable, connect the satellite receiver's VHF/UHF OUT
jack to the VCR's VHF/UHF IN jack.
6
Using A/V and S VIDEO cables, connect the satellite receiver's AUDIO
and S VIDEO OUT jacks to the VCR's AUDIO and S VIDEO IN jacks.
7
Using A/V and S VIDEO cables, connect the VCR's AUDIO and S
VIDEO OUT jacks to the LCD projection TV's AUDIO and S VIDEO
IN jacks.
8
Run Auto Program, as described in "Setting Up the LCD Projection TV
Channel List" on page 54.