Introducing the Sony LCD Projection TV
Loosen the screw that holds the lamp, then pull out the lamp.
The lamp is very hot immediately after use. Never touch the front
glass of the lamp or the surrounding parts.
After it has cooled, place the used lamp into the empty box of the
replacement lamp. Never put the used lamp into a plastic bag while
the lamp is hot.
Reattach the lamp.
Place back the new lamp and tighten the screw.
Replace the lamp cover, slide the knob to right till the v/V mark
matches, and then tighten the screw.
If the lamp cover screw is inserted incorrectly, the lamp may not
operate properly. In such a case, remove the screw, insert it
correctly and then tighten the screw completely.
If the lamp cover is not reattached securely, the self-diagnostic
function may be triggered and the POWER/STANDBY indicator
flashes three times (see page 122).