Download  Print this page

Cable And Antenna - Sony GRAND WEGA KDF-55XS955 Operating Instructions Manual

Lcd projection tv hd-tv.
Hide thumbs


Setting Up the LCD Projection TV

Cable and Antenna

For best results, use this connection if you:
Have a cable and an antenna.
(This is convenient if you are using a separate rooftop antenna to receive
additional channels that are not provided by your cable TV company.)
Do not have a cable box or VCR. (If you have a cable box, see pages 31
and 32. If you have a VCR, see pages 35 and 36.)
Antenna and CATV cable
Cable Type
Connect As Shown
Cable TV
(CATV) and
Antenna cable
Notes on Using This Connection
To Do This ...
Switch the LCD projection
TV's input between the cable
and antenna
For optimum picture quality, a 75-ohm coaxial cable antenna connection
is highly recommended. Radio waves and other interference can easily
affect a 300-ohm twin lead cable, resulting in signal deterioration. If you
use a 300-ohm twin lead cable, keep it as far away as possible from the
LCD projection TV.
Do not use an indoor antenna, which is especially susceptible to radio
Do This ...
to switch back and forth between the
LCD projection TV's VHF/UHF and CABLE
CATV cable


Table of Contents

   Also See for Sony GRAND WEGA KDF-55XS955

   Related Manuals for Sony GRAND WEGA KDF-55XS955

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: