MTS is available only for analog programs.
This option can be set only when the
Select for stereo reception when viewing a program
broadcast in stereo.
Select to automatically switch to second audio
programs when a signal is received. (If no SAP
signal is present, the LCD projection TV remains in
Select for mono reception. (Use to reduce noise
during weak stereo broadcasts.)
The LCD projection TV's speakers are turned off,
but the audio output from your audio system can
still be controlled by the LCD projection TV's
The LCD projection TV's speakers are turned off
and the audio output of the LCD projection TV is
fixed. Use your audio receiver's volume control to
adjust the volume (and other settings) through your
Select to turn on the LCD projection TV speakers.
Select to turn off the LCD projection TV speakers
and listen to the TV's sound only through your
external audio system speakers.
Using the Menus
option is set to Off.