Setting Up the LCD Projection TV
LCD Projection TV Front Panel and Connectors
1 Memory Stick
2 Memory Stick slot
3 LAMP LED
4 TIMER LED
7 CHANNEL +/–
8 VOLUME +/–
When the Memory Stick indicator is lit, indicates that the
Memory Stick is being read. (Do not remove the Memory
Stick when the indicator is lit.)
For inserting Memory Stick media to view on your LCD
projection TV. For details, See "Inserting and Removing a
Memory Stick" on page 78.
Lights up in red when the lamp for the light source has
burned out. For details, see "Replacing the Lamp" on
When lit, indicates one of the timers is set. When the
timer is set, this LED will remain lit even if the TV set is
turned off. For details, see page 122.
Lights up in green when the TV set is turned on. When in
standby mode, the LED lights up in red. The LED does
not light up when the main power is turned off. If the LED
blinks continuously, this may indicate the display unit
needs servicing (see "Contacting Sony" on page 115).
Press to turn on/off the LCD projection TV. The
button has a built-in Infrared (IR) Receiver that receives
IR signals from the remote control.
Press to scan through channels.
Press to adjust the volume.
Press to select between the TV's tuner and other video