Satellite Receiver - Sony GRAND WEGA 2-059-370-14(2) Operating Instructions Manual

Satellite Receiver

Rear of LCD projection TV
S VIDEO
VIDEO
L (MONO)
AUDIO
R
S VIDEO
Disconnect all power sources before making any connections.
1
Connect the satellite antenna cable to the satellite receiver's
SATELLITE IN jack.
2
Using A/V and S VIDEO cables, connect the satellite receiver's AUDIO
and S VIDEO OUT jacks to the LCD projection TV's AUDIO and S
VIDEO IN jacks.
VIDEO IN
1 3 4
7
R
AUDIO IN
VIDEO (yellow)
AUDIO-L (white)
AUDIO-R (red)
A/V cable (not supplied)
S VIDEO cable (not supplied)
✍
If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable
(yellow) instead of the S VIDEO cable.
Setting Up the LCD Projection TV
VHF/UHF CABLE
L

Satellite receiver

Satellite
antenna
cable
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
43