Sony GRAND WEGA 2-059-370-14(2) Operating Instructions Manual page 116

Using the Menus
116
Option Description
Timer 1
Timer 2
Timer 1
Time.
Press V or v to highlight
1
timer, press b.
✍
To go directly to programming Timer 1 or 2, press
Press V or v to highlight one of the following options, then
2
press
Program
Off
3
If you selected
day(s), hour, minute, duration, and channel number. Press
next setting.
Press B to go back to the previous setting.
4 Press
panel will light, indicating the Timer has been set.
Current Time
1
Press
Press V and v to set the current time (day, hour, minute,
2
and AM/PM). Press
setting and move to the next setting. Press B to go back the
previous setting.
3
Press
Diagnostics Display diagnostics information about the TV. This can be
useful in providing information to an authorized technician or
repair person.
CableCARD This list of selectable CableCARD options will vary, depending
on your cable service provider.
Displays...
You can use the Timers to program the
LCD projection TV to turn on and off
and tune to a specific channel at two
scheduled viewing times.
and Timer 2 cannot be set until you set the
Timer 1
instead of pressing b.
.
Select to set the Timer by day, time,
duration, and channel.
Select to turn off the Timer. (Your
previous settings are saved.)
in step 2, press V and v to set the
Program
or press b to confirm each setting and move to the
MENU to exit the menu screen. An LED on the front
You can set the current time.
to select Current
(or press b) to confirm each
MENU
to exit the menu screen.
Current
or Timer 2. To set the
Time.