Sony GRAND WEGA 2-059-370-14(2) Operating Instructions Manual page 17

For KDF-WE655 series
✍
For instruction for KDF-WF655 series, see page 20.
1
Turn off the power on the main unit. Wait several minutes, then unplug
the power cord.
(The cooling fan will continue to operate for about two minutes after
turning the power off.)
2
Wait at least 30 minutes after unplugging the power cord to allow the
lamp to cool down before replacing it.
Take the new lamp out of the box.
✍
Do not shake the lamp. Vibration can damage the lamp or shorten
its life.
✍
Avoid touching the front glass of a new lamp or the glass of the
lamp receptacle. This may reduce picture quality or lamp life.
3
Loosen the screws on the rear side panel.
Introducing the Sony LCD Projection TV
This illustration is for KDF-50WE655.
The screw for KDF-42WE655 is more
to the inside.
(Continued)
17