Table of Contents
Advertisement
Menu Operation
You can set the following items using the relevant menu:
• Adjusting printout quality
• Setting the margin print option
• Setting the mirror function
Besides the above menus, there is a cleaning menu. For
detailed information on this menu, see "Cleaning the
thermal head" on page 17.
Notes
• The next printout will be printed with the values most
recently set. You cannot adjust the setting during
printing. Once you have adjusted and stored the
settings, the printer operates according to those
settings until their values are modified.
• If you do not press any button for approximately 15
seconds after pressing the MENU button, the printer is
automatically reset to standby status.
• For adjusting printout quality and margin print option
settings, you can also adjust the settings from the
printer driver supplied with the printer. The settings
adjusted using the printer driver take precedence,
when you print the image by sending the print
command from the computer. When you print the
image by pressing the PRINT button, settings adjusted
using the menus on the printer take precedence.
Adjusting Printout Quality
You can adjust the picture quality of a printout with the
MENU button before printing.
1, 4
2, 3
1
Press the MENU button.
2
Display the GRAPHICS menu by pressing the F or
f button, then press the g button.
The printer enters the printout adjustment mode.
The first item of the printout adjustment menu
(DARK) appears in the printer window display. The
default or preset level is shown both as a value and
graphically.
Default level (or preset level)
3
Perform the desired adjustment.
1 Select the item to be adjusted by using the F or
f button.
F: Scrolls up to the previous item.
f: Scrolls down to the next item.
2 Adjust the level by pressing the G or g button.
You can adjust the level of the tone for DARK
and LIGHT and GAMMA of the half tone
between –32 to +32. The center of the graph
and the value 0 is the standard level.
g: Increases the level (up to +32).
G: Decreases the level (down to –32).
The SHARPNESS can be adjusted among 4
levels: NONE /LOW/MIDDLE/HIGH.
Adjustment
item
Tone
DARK
LIGHT
Sharpness
SHARPNESS Outlines are blurred
Half tone
GAMMA
Example: To set the level of DARK to 12
Press the g button twelve times.
Moves to the level 12 position.
4
Press the MENU button again to exit from the
printout adjust menu.
The printer returns to standby status.
Adjustment
Adjust the dark areas
of the images
Adjust the light areas
of the images
or emphasized.
Adjust the density of
the half tones.
The value changes.
Menu Operation
15
Advertisement
Table of Contents
