Menu Operation; Confirming Information; Adjusting The Print Quality - Sony UP-DF550 Manual

Menu Operation

Confirming Information

You can confirm the IP address and the total number of
prints made since you started the unit.
1
3
2
1
Press the MENU button.
2
Display the INFORMATION menu by pressing the
F or f button, then press the g button.
3
Select the item you want to confirm by pressing the
F or f button.
To display the IP address
Select IP ADDRESS.
Note
You can change the IP address using the menu or
using the browser on the computer used to manage
the unit.
For detailed information on how to change the IP
address, refer to "Setup of the Unit" described in
the other section of this manual "Setup Manual."
28
Menu Operation
IP address
To confirm the total number of prints made
since you started the unit
Select TOTAL PRINTS.
This item is useful to estimate when regular
maintenance such as replacing the cleaning roller,
cleaning the thermal head, etc., is necessary.
For details, see "Maintenance" (on page 35).

Adjusting the Print Quality

You can adjust the following for each gamma curve. The
printer allows you to store the adjusted values for each
gamma curve.
• Sharpness of the printout.
You can adjust the sharpness among 15 levels between
1 and 14, including OFF.
• Tone of printouts
You can adjust the high tone (dark area of the images)
and the low tone (light areas of images).
Notes
• You cannot adjust the gamma curve itself using the
menu. To change the gamma curve, contact your
nearest Sony dealer.
• To make a printout of the pattern print to be used for
adjusting the tone of printouts in this section correctly,
be sure to perform the full range calibration for each
type of blue thermal film before starting the
adjustments described here.
Total number of prints