Operation; Loading Paper; Recommended Paper - Sony UP-D71XR Instructions For Use Manual

Operation

Loading Paper

Recommended Paper

The following paper is made especially for the UP-
D71XR.
• UPT-735BL Blue Thermal Film printing pack
Contains blue thermal transparent film.
100 sheets of 8 × 10 inches size film
• UPP-725 Thermal Paper printing pack
Contains thermal paper.
100 sheets of 8 × 10 inches size paper
Be sure to use paper made expressly for the UP-D71XR.
If you use other paper, the quality of the printout cannot
be guaranteed. Use of another type of paper may also
cause malfunction of the printer.
Loading Paper
Follow the steps below to load the print paper.
When you use the printer for the first time, start from
step 2.
Notes
• When loading paper on the paper tray, do not turn off
the power. If you turn off the power, the image data
stored in the memory will be lost.
• When handling the paper, do not touch the printing
surface. Dust, finger prints, or sweat are likely to cause
unsatisfactory printing.
1
Push the EJECT TRAY button on the front panel.
The paper tray is ejected.
Push the EJECT TRAY button.
2
Open the paper tray cover by putting your fingers in
the grooves on both sides of the paper tray, and
pulling it upward in the direction of the arrow.
Note
If the old printing surface protection sheet remains
in the paper tray, remove it.
3
Place the paper in the paper tray so that the printing
surface faces down, with the printing surface
protection sheet on the bottom.
When loading UPT-735BL Blue Thermal
Film
Blue thermal film: place the film sheets in the paper tray
with the printing surface facing down.
When loading UPP-725 Thermal Paper
Thermal paper: place the sheets in the paper tray with
the printing surface facing down.
Squared-off corner
Printing surface
protection sheet
Front
Printing surface
protection sheet
Front
11
Loading Paper