Table of Contents
Advertisement
Cleaning the filter
Ventilation holes are provided on the right side and the
rear of the printer to prevent the unit from overheating.
When the message "CLEAN FAN FILTER" appears on
the printer widow display, the filter covering the
ventilation holes on the rear of the unit has become dirty.
To clean the filter, proceed as follows.
1
Remove the fan cover, then remove the filter.
Filter
Fan cover
2
Clean the fan using a vacuum cleaner or the like.
Notes
• Be careful that the filter does not get caught in the
vacuum cleaner.
• Do not rub the net of the filter roughly.
3
Reset the filter and the fan cover on the side panel
as they were.
Specifications
Power requirements
100 to 120 V AC, 50/60 Hz
(for 100 to 120 V AC users)
220 to 240 V AC, 50/60 Hz
(for 220 to 240 V AC users)
Power consumption
2.9 A (for 100 to 120 V AC users)
1.3 A (for 220 to 240 V AC users)
Operating temperature
5°C to 35°C (41°F to 95°F)
Operating humidity
20% to 80% (no condensation allowed)
Storage and transport temperature
–20°C to 60°C (–4°F to 140°F)
Storage and transport humidity
20% to 90% (no condensation allowed)
Dimensions
About 412 × 210 × 431 mm (w/h/d)
(16 3/8 × 8 3/8 × 17 inches)
Mass
Approx. 15.5 kg (34 lb 3 oz)
Printing system Thermal printing
Thermal head
2,560 elements, 11.8 dot/mm (300dpi)
Gradations
256 levels
Maximum print size
232.2 × 196.4 mm
Picture elements
2,743 × 2,320 dots (w/h)
Printing time
Approx. 45 seconds
Picture memory
16 M bytes (4,096 × 4,096 × 1 × 8 bits)
Interface
SCSI × 2,
(Half pitch 50-pin connector)
PARALLEL DATA × 1,
(Amphenole 36-pin connector)
Accessories supplied
Paper tray (1)
Fan cover with a filter (1)
Thermal Head Cleaning Kit (1)
Cleaning sheets (2)
Tray guide cover (1)
AC power cord (1)
Operation Guide (1)
CD-ROM (1)
Warranty card (1) (for the customers in
the U.S.A and Canada)
SOFTWARE LICENSE
AGREEMENT (1)
a) When you use the printer in the U.S.A. or
Canada, use the AC power cord supplied.
When you use the printer in a country
other than the U.S.A. or Canada, use the
proper AC power cord for your local
power system.
a)
19
Specifications
Advertisement
Table of Contents
