Bosch Rexroth Marex SB Manual page 25

ID Indication
LED off
LED steadily lighted
LED flashing
no ID assigned
no automatic ID set yet
ID 1 ID 2
8 Shift CTRHEAD switch 1 to open.
Buzzer in neutral
When the lever of the active control head is moved to neutral, a short buzzer sound can signal this.
Short sound, when lever in neutral
(With two control units, only the port unit must be adjusted.)
No sound (default condition)
(With two control units, only the port unit must be adjusted.)
Comparision of positions/ cruising ranges
Compare position
A change of control stations is possible only, if the lever of the
new control station is set in the same cruising range (ahead,
neutral, astern) and in the same position (maximum deviation
30%) as the lever of the active control station. According to the
classification rules, this mode has to be selected.
(With two control units, only the port unit must be adjusted.)
Compare range
A change of control stations is possible only, if the lever of the
new control station is set either in the same cruising range
(ahead, neutral, astern) as the lever of the active control station
or in neutral position.
(With two control units, only the port unit must be adjusted.)
22
ID 3 ID 4
ID 5
CTRHEAD
2
CTRHEAD
1
2
3
4
2
CTRHEAD
1
2
3
4
3
CTRHEAD
1
2
3
4
3
CTRHEAD
1
2
3
4
1
1
2
3
4