Mechanical Throttle Control / Gear Shifting - Bosch Rexroth Marex SB Manual

3.3 Mechanical throttle control and gear shifting
actuator 1
The setting of switchboard SYSCON (switches 1 – 6) assigns the function (speed or gear control) to
the actuators (see chapter 2 overview).
3.3.1 Push-/pull-cable
The mechanical connection between actuator and lever for throttle adjustment or gear control at the
engine is done by push-/pull-cables.
76 stroke
**
When laying push-/pull cables as few direction changes as possible should be
made. The efficiency of the cables decreases with every deflection.
!
Deflection angle 90°
Deflection angle 360°
10
SYSCON
1
2
3
1
2
+ for half the stroke
170 3
110 33 max
22,1
radial excursion: 8° max. to all sides
usable force = 82% of the force applied
usable force = 55% of the force applied
actuator
3
2
1
2
1
min 5
3,27
min 5
9,46 9,46
6,35
2