How To Use This Guide - Waters Bus SAT/IN Installation Manual

How to Use This Guide

Purpose
The Waters Bus SAT/IN Module Installation Guide contains information needed to install a
Waters™ Bus SAT/IN™ module. The Bus SAT/IN module translates signals from analog
devices to digital form, and transmits those signals to the Waters Bus LAC/E card inside a
host personal computer.
Audience
This installation guide is intended for anyone who must install a Bus SAT/IN module. This
guide assumes that the Waters Bus LAC/E™ card is installed in the host computer and
working properly.
Structure of this guide
The Waters Bus SAT/IN Module Installation Guide is divided into sections. Each page is
marked with a footer, providing easy access to all information within the chapter. The table
below describes the material covered in each section.
Title
Chapter 1, Introduction
Chapter 2, Installation
Chapter 3, Using the Bus
SAT/IN Module
Appendix A, Bus SAT/IN
Module Specifications
Appendix B, Spare Parts
Appendix C, Warranty
Information
10 How to Use This Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Description
Describes the Bus SAT/IN module and its
connection to other components of the
chromatography system.
Contains procedures for unpacking and
connecting the Bus SAT/IN module to the
Bus LAC/E card and other devices.
Describes the powerup sequence of the Bus
SAT/IN module.
Provides Bus SAT/IN module specifications.
Provides part numbers for spare parts.
Provides warranty and service information.