Figure 14 Linkit Smart 7688 In Station Mode - MEDIATEK LinkIt Smart 7688 Get Started Manual

Step2: Connect the Host Computer to an AP that is in a Wi-Fi Network
Open the Wi-Fi connection utility on your computer and connect to the same access point as in Step 1.
Your computer is now under the same local area network formed the by the Wi-Fi Access Point you
connected to, as shown Figure 14.
Step3: Open Terminal Emulator and Sign In Again
Once your host computer has joined the same Wi-Fi network, you can again connect to LinkIt Smart
7688 with mylinkit.local domain again through SSH as before.
Step 4: Check for Internet Connection
Now check if you've established internet connection by typing # ping –c 5 www.mediatek.com in
the Terminal window:
Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.
MediaTek LinkIt™ Smart 7688 Get Started Guide

Figure 14 LinkIt Smart 7688 in Station Mode

© 2015 MediaTek Inc.
This document contains information that is proprietary to MediaTek Inc.
Page 13 of 15