Related Manuals for Ubiquiti UVC-G3-LED
Summary of Contents for Ubiquiti UVC-G3-LED
- Page 1 IR Range Extender Accessory for UVC-G3 Model: UVC-G3-LED Available from A1 Security Cameras w.a1securitycameras.com email: sales@a1securitycamera...
-
Page 2: Package Contents
Introduction Thank you for purchasing the Ubiquiti Networks® IR Extender for the UniFi® Video Camera G3. This Quick Start Guide is designed to guide you through installation and includes warranty terms. Package Contents IR Range Extender Accessory for UVC-G3 Model: UVC-G3-LED... -
Page 3: Hardware Overview
IR control. WARNING: Do not connect any device to the accessory port on the UVC-G3. Damage to the device may occur. The accessory port is designed for use with the UVC-G3-LED accessory only. Available from A1 Security Cameras w.a1securitycameras.com email: sales@a1securitycamera... -
Page 4: Hardware Installation
1. Pull out the sun visor and remove it. Then remove the accessory port cover located on the bottom of the UVC-G3. 2. Orient the UVC-G3-LED with the Accessory Connector at the bottom. Place the LED Ring over the front of the UVC-G3 in place of the sun visor. - Page 5 3. Insert the Accessory Connector into the accessory port until it locks into place. 4. Tighten the two screws located at the bottom of the LED Ring to secure it. Important: Do not over-tighten the two screws. Excessive torque may damage the LED Ring and/or the UVC-G3. Available from A1 Security Cameras w.a1securitycameras.com email: sales@a1securitycamera...
- Page 6 Enabling the External IR LEDs The UVC-G3-LED may be enabled using UniFi Video or directly through the camera UI. Once enabled, the UVC-G3-LED will automatically turn on under low light conditions. UniFi Video 1. Launch UniFi Video and log in.
- Page 7 3. The camera configuration panel will appear on the right side of the window. Click Accessories, and then click the toggle box next to Enable External Accessory. 4. Click Save. Available from A1 Security Cameras w.a1securitycameras.com email: sales@a1securitycamera...
- Page 8 3. 1. Launch the Ubiquiti Device Discovery Tool. 2. A list of Ubiquiti devices on the network will appear. Locate the UVC-G3 with the installed UVC-G3-LED. Click the IP address of the camera in the Host column.
-
Page 9: Pole Mount
4. On the Configure window, check the box next to Enable External Accessory. 5. Click Save Changes. Available from A1 Security Cameras w.a1securitycameras.com email: sales@a1securitycamera... - Page 10 Specifications UVC-G3-LED Ø 80 x 26 mm Dimensions (Ø 3.15 x 1.02") Weight 75 g (2.65 oz) LEDs (6) Infrared LEDs IR Range Up to 25 m (82 ft) Power Method Accessory Connector Power Supply UVC-G3 Max. Power Consumption 7.5W Operating Temperature -30 to 70°...
- Page 11 Safety Notices Read, follow, and keep these instructions. Heed all warnings. Only use attachments/accessories specified by the manufacturer. WARNING: Hot Surface. Do not touch. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm.
- Page 12 (VI) has no original Ubiquiti MAC label, or is missing any other original Ubiquiti label(s); or (VII) has not been received by Ubiquiti within 30 days of issuance of the RMA.
- Page 13 No Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the warranty period, and the Products being received at UBIQUITI NETWORKS’ facility freight prepaid in accordance with the RMA process of UBIQUITI NETWORKS.
-
Page 14: Connecting Power Over Ethernet
Limitation of Liability EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING... - Page 15 Compliance Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
- Page 16 RoHS/WEEE Compliance Statement English European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams.
- Page 17 Español La Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
-
Page 18: Adjusting The Camera View
[German] Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet. Ελληνική Δια του παρόντος, UBIQUITI NETWORKS, δηλώνει ότι αυτή η συσκευή UBIQUITI NETWORKS, είναι σε συμμόρφωση με τις [Greek] βασικές απαιτήσεις και τις λοιπές σχετικές διατάξεις της οδηγίας 1995/5/ΕΚ. -
Page 19: Specifications
[Swedish] egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. Español Por medio de la presente UBIQUITI NETWORKS declara que este dispositivo UBIQUITI NETWORKS, cumple con los requisitos [Spanish] esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. -
Page 20: Safety Notices
. u b n t . c o m ©2015 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, and UniFi are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries.