Unifi video 1080p indoor/outdoor ip camera with infrared and optical zoom (41 pages)
Summary of Contents for Ubiquiti UVC-G3-BULLET
Page 1
Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit ui.com/toughcable...
Hardware Overview Ethernet Port 10/100 RJ45 port connects to an 802.3af PoE switch for PoE power and data. Reset Button To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the camera is powered on. Hardware Installation Wall/Ceiling Mount...
App Store® for iOS devices and Google Play™ store for Android-based devices. For details on using the UniFi Video software, refer to the User Guide at: ui.com/download/unifi‑video Adjusting the Camera View Specifications UVC-G3-BULLET Dimensions Ø 75 x 140 mm...
Page 12
(Ø 2.95 x 5.51") Weight 300 g (10.58 oz) Enclosure Injection-Molded Polycarbonate and Die-Cast Aluminum Networking Interface (1) 10/100 Ethernet Port Sensor 1/3" 4-Megapixel HDR Sensor Lens EFL 3.6 mm, f/1.8 Viewing Angle Before Lens Correction 85° (H), 44.8° (V), 98.1° (D) After Lens Correction 72°...
Operating Humidity 20 to 90% Noncondensing Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Hot surface. Do not touch. WARNING: Do not use this product in location that can be submerged by water.
Connection to a different power source than those specified may result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed. 2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician. Electrical Safety Information 1.
2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.