Related Manuals for Ubiquiti UniFi Video UVC-G3-FLEX-3
Summary of Contents for Ubiquiti UniFi Video UVC-G3-FLEX-3
- Page 1 1080p Indoor/Outdoor IP Camera with Infrared and 802.3af Support Model: UVC-G3-FLEX...
-
Page 2: Package Contents
Introduction Thank you for purchasing the Ubiquiti Networks® UniFi® Video Camera G3 Flex. This Quick Start Guide is designed to guide you through installation and includes warranty terms. Package Contents G3 Flex Camera Flush Mount Pole/Wall Outdoor Mount Cover Security Screw... -
Page 3: Outdoor Installation Requirements
AC ground of the PoE. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial‑grade, shielded Ethernet cable from Ubiquiti Networks. For more details, visit www.ubnt.com/toughcable • Surge protection should be used for all outdoor installations. -
Page 4: Before You Begin
Before You Begin The UVC G3 Flex camera is designed to work with the UniFi Video® controller software (v3.9.2 or higher). The software may be hosted on any of the following: • UniFi Application Server, model UAS‑XG • UniFi NVR, model UVC-NVR-2TB •... -
Page 5: Hardware Overview
Hardware Overview Microphone Camera Lens Light Sensor Swivel Base Microphone Microphone for recording audio Camera Lens Lens for viewing/recording video Light Sensor Sensor for ambient light detection Status indicator for the following: LED State Status Alternating Device is busy; do not touch or unplug it. White/Blue This usually indicates that a process such as a firmware upgrade is taking place. -
Page 6: Bottom View
Bottom View Reset Button Ethernet Port Ethernet Port The Ethernet Port is a 10/100 Mbps port used to supply power from a PoE 802.3af‑compliant switch to the camera. The switch should be connected to a LAN running DHCP services and the UniFi Video Controller software. Reset Button The Reset Button is used to reset the camera to factory defaults. - Page 7 Additional Mounts Available There are two additional mounts available for the G3 Flex: a Ceiling Mount and a Pendant Mount. Each is sold separately. Use the optional Ceiling Mount, Screw Kit, and Mount Cover to install the G3 Flex camera on a solid horizontal surface or ceiling.
-
Page 8: Installation
Installation The UVC G3 Flex can be installed using one of the following methods: • Desktop For installing on a flat surface such as a desktop or table/shelf; could be set up for temporary installations. Wall/Ceiling • For installing in a secure location; used more for stationary or permanent installations. - Page 9 Desktop/Table 1. Remove the Flush Mount from the bottom of the camera. 2. Insert one end of the RJ‑45 cable into the Ethernet Port and the other end into a PoE 802.3af‑compliant switch. 3. Replace the Flush Mount by following these steps: a.
- Page 10 4. Place the camera on a desk or table in its upright position. 5. Adjust the viewing angle or surveillance coverage as needed by following these steps: • Tilt the lens up or down to adjust the angle vertically • Turn the camera body left or right to adjust the angle horizontally Installation complete.
- Page 11 Indoor Wall/Ceiling 1. If the Ethernet cable is coming from the inside of a wall: a. Drill or cut a hole in the wall and feed the Ethernet cable through the opening. b. Pull the Ethernet cable forward and slide it through the opening in the mount.
- Page 12 4. Attach the camera to the Flush Mount by lining up the notches with the slots in the base of the camera. Press firmly together until the camera is secure. Vertical mounting on a wall Vertical mounting on ceiling Installation complete. Horizozntal Surface / Ceiling with Flush Mount Indoor Wall with Flush Mount...
- Page 13 Pole Note: If you are mounting the camera outdoors, it must be installed in the upright position to prevent water from getting into the base of the camera. Use the Outdoor Cover for additional protection from moisture. 1. Attach the Pole Mount to a pole using the included Zip Ties. 2.
- Page 14 4. Attach the camera to the Outdoor Cover by lining up the notches with the slots on the bottom of the camera. Press firmly until the camera snaps on. 5. Attach the camera to the Pole Mount: a. Press the camera against the Pole Mount and line up the notches on the mount with the slots on the bottom of the camera.
- Page 15 6. Use a phillips screwdriver to install the Security Screw through the Outdoor Cover and into the base of the camera. This helps secrure the camera to the mount. 7. Adjust the camera to the desired viewing angle by: • Tilting the lens up or down for vertical adjustment •...
- Page 16 UniFi Video Ensure that you are running UniFi Video software version 3.9.2 or newer. The latest version of the UniFi Video software is available at www.ubnt.com/download/unifivideo The UniFi Video auto-management feature should automatically detect your new camera(s). To manage the camera, perform the following steps: 1.
-
Page 17: Specifications
Specifications UVC-G3-FLEX Ø 107.5 x 48 x 48 mm Dimensions (Ø 4.23 x 1.89 x 1.89") Weight 170 g (5.99 oz) Sensor 1/2.7" 2‑Megapixel HDR Sensor Lens EFL 4mm / f2.0 Viewing Angle with Lens Distortion Correction (LDC) LDC Off 87.4°... -
Page 18: Safety Notices
Safety Notices Read, follow, and keep these instructions. Heed all warnings. Only use attachments/accessories specified by the manufacturer. WARNING: Hot Surface. Do not touch. WARNING: Do not use this product in a location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. -
Page 19: Limited Warranty
(VI) has no original Ubiquiti MAC label, or is missing any other original Ubiquiti label(s); or (VII) has not been received by Ubiquiti within 30 days of issuance of the RMA. -
Page 20: Limitation Of Liability
SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS, DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY OF THE FOREGOING. -
Page 21: Industry Canada
Note Some countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You may have other rights that vary from country to country, state to state, or province to province. Some countries, states and provinces do not allow the exclusion or limitation of liability for incidental or consequential damages, so the above limitation may not apply to you. -
Page 22: Rohs/Weee Compliance Statement
CE Marking CE marking on this product represents the product is in compliance with all directives that are applicable to it. RoHS/WEEE Compliance Statement English European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. - Page 23 Español La Directiva 2012/19/UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
-
Page 24: Declaration Of Conformity
2014/53/EU irányelvnek. Az EU-megfelelőségi nyilatkozat teljes szövege elérhető a következő internetes címen: www.ubnt.com/compliance Íslenska [Icelandic] Hér með lýsir UBIQUITI NETWORKS yfir því að UVC-G3-FLEX er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 2014/53/EU. Fullur texti ESB samræmisyfirlýsing er að finna á eftirfarandi netfangi: www.ubnt.com/compliance... -
Page 25: Online Resources
Norsk [Norwegian] UBIQUITI NETWORKS erklærer herved at utstyret UVC-G3-FLEX er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 2014/53/EU. Den fulle teksten til EU-samsvarserklæringen er tilgjengelig på følgende internettadresse: www.ubnt.com/compliance Polski [Polish] UBIQUITI NETWORKS niniejszym oświadcza, że typ urządzenia radiowego UVC-G3-FLEX jest zgodny z dyrektywą... - Page 26 . u b n t . c o m ©2018 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, and UniFi Video are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries.