Battery connector board
Table 6-6
Battery connector board description and part number
Description
Battery connector board
Before removing the battery connector board, follow these steps:
1.
Prepare the computer for disassembly
2.
Place the computer in "Battery Safe mode"
3.
Remove the bottom cover
4.
Remove the battery
Remove the battery connector board:
1.
Remove the two Phillips M2.0 × 2.5 screws (1) that secure the board to the computer.
2.
Pull the board away from the connector on the system board, and then remove the battery connector
board from the computer (2).
Reverse this procedure to install the battery connector board.
44
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
(Preparation for disassembly on page
(Battery Safe mode on page
(Bottom cover on page
(Battery on page
37).
28).
29).
Spare part number
L45086-001
28).