Solid-State Drive - HP ZHAN 66 Pro 15 G2 Maintenance And Service Manual

M.2 solid-state drive
Table 5-4 Solid-state drive descriptions and part numbers
Description
512 GB, PCIe, TLC
256 GB, PCIe, TLC
256 GB, PCIe, value
256 GB, PCIe, value, lock
128 GB, SATA-3, TLC
128 GB, SATA-3, TLC, lock
16 GB, PCIe (Optane memory module)
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly
2. Place the computer in "Battery Safe mode"
3. Remove the bottom cover
4. Remove the battery
Remove the solid-state drive:
1. Remove the Phillips M2.0 × 2.5 screw (1) that secures the solid-state drive to the computer.
2. Remove the solid-state drive (2) by pulling the module away from the slot at an angle.
Reverse this procedure to install the solid-state drive.
(Preparation for disassembly on page
(Battery Safe mode on page
(Bottom cover on page
(Battery on page 37).
28).
29).
Component replacement procedures
Spare part number
L57511-001
L57509-001
L57510-001
L63028-001
L57508-001
L63027-001
L57507-001
28).
33