System Board - HP ZHAN 66 Pro 15 G2 Maintenance And Service Manual

System board

NOTE: All system board spare part kits include replacement thermal material.
All system boards use the following part numbers:
xxxxxx-001: Non-Windows operating systems
xxxxxx-601: Windows 10 operating system
Table 6-11 System board descriptions and part numbers
Description
Intel Core i7-8565U processor and 2 GB of discrete graphics memory
Intel Core i5-8265U processor and 2 GB of discrete graphics memory
Before removing the system board, follow these steps:
1. Prepare the computer for disassembly
2. Place the computer in "Battery Safe mode"
3. Remove the following components:
a. Bottom cover
b. Battery
c. Battery connector board
When replacing the system board, be sure to remove the following components (as applicable) from the
defective system board and install on the replacement system board:
● Memory modules
● WLAN/Bluetooth module
M.2 solid-state drive
●
Heat sink
●
Remove the system board:
1. Disconnect the following cables from the system board:
(1) Power connector cable
(2) Speaker cable
(3) Antennas from WLAN module (select models only)
(4) Display cable (ZIF)
(5) USB cable from USB/power board (ZIF)
(6) Fan cable
(7) Keyboard cable (ZIF)
(8) Card reader cable (ZIF)
(9): Touchpad cable (ZIF)
50 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
(Bottom cover on page
(Battery on page 37)
(Battery connector board on page
(Memory modules on page
(WLAN/Bluetooth combo card on page
(M.2 solid-state drive on page
(Heat sink on page 40)
(Preparation for disassembly on page
(Battery Safe mode on page
29).
30)
33)
Spare part number
L57502-xxx
L57501-xxx
28).
28).
44)
31)