Solid-State Drive Specifications - HP ZHAN 66 Pro 15 G2 Maintenance And Service Manual

Solid-state drive specifications

Table 10-4 Solid-state drive specifications
Height
Length
Width
Weight
Transfer rate
Sequential read
Random read
Sequential write
Random write
Interface type
Ready time, maximum (to not busy)
Access times, logical
Total logical sectors
Operating temperature
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications may
differ slightly.
NOTE: Certain restrictions and exclusions apply. Contact technical support for details.
128 GB* 256 GB*
1.0 mm 1.0 mm
50.8 mm 50.8 mm
28.9 mm 28.9 mm
< 10 g < 10 g
up to 2150 MB/sec up to 2150 MB/sec
Up to 300,000 IOPs Up to 300,000 IOPs
up to 1260 MB/sec up to 1550 MB/sec
Up to 100,000 IOPs Up to 100,000 IOPs
SATA-3 PCIe
1.0 ms < 1.0 ms
0.1 ms 0.1 ms
234,441,648 468,883,296
0°C to 70°C (32°F to 158°F)
512 GB*
1.0 mm
50.8 mm
28.9 mm
< 10 g
up to 2150 MB/sec
Up to 300,000 IOPs
up to 1550 MB/sec
Up to 100,000 IOPs
PCIe
< 1.0 ms
0.1 ms
1,000,215,216
Solid-state drive specifications 75