Memory Modules - HP ZHAN 66 Pro 15 G2 Maintenance And Service Manual

Memory modules

Table 5-2 Memory module descriptions and part numbers
Description
16 GB
8 GB
4 GB
IMPORTANT:
www.hp.com.
Failure to update the computer to the latest BIOS prior to installing new memory may result in various system
problems.
Before removing the memory module, follow these steps:
1. Prepare the computer for disassembly
2. Place the computer in "Battery Safe mode"
3. Remove the bottom cover
4. Remove the battery
Remove the memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The edge of the module opposite the slot rises away from the computer.)
2. Remove the memory module (2) by pulling the module away from the slot at an angle.
NOTE:
module slot.
Reverse this procedure to install a memory module.
30 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Before adding new memory, make sure you update the computer to the latest BIOS from
(Bottom cover on page
(Battery on page
Memory modules are designed with a notch to prevent incorrect insertion into the memory
(Preparation for disassembly on page
(Battery Safe mode on page
29).
37).
Spare part number
937438-852
937236-852
L10598-852
28).
28).