Imu - Mm5.10; Lt4 (Dpi Only); Gps - Bosch IMSA Prototype Classes Scrutineering System Manual

Bosch Motorsport
3.2.3 IMU – MM5.10
Functional Description: 5 axis inertial measurement unit
Mounting Note:
This device must be fitted in the cockpit on the centerline of the

longitudinal axis of the vehicle in an easily accessible IMSA approved
location. Use of the mounting bracket listed below is required.
Device to be mounted with connector receptacle facing to the back of the

vehicle and product sticker facing vertically 'up'. Mounting plate to be
aligned within +/-0.5° of vehicle axes.
Part Number: F02U.V01.511-02
Mounting Bracket Part Number: 1271.032.390
Temperature Range: -20 to 85 °C
3.2.4

LT4 (DPi Only)

Functional Description: 4 channel lambda sensor controller
Mounting Note:
This device must be fitted securely in the cockpit in an easily accessible

location.
This device should be mounted to sustain vibrations within the Vibration

Profile 1 defined in the appendix.
Part Number: F01T.A20.070-09
Temperature Range: -20 to 85 °C
3.2.5

GPS

Functional Description: 10 Hz GPS unit
Mounting Note:
This device must be fitted to the top surface of the vehicle in an IMSA

approved location.
Part Number: F02U.V0U.203-01 OR F02U.V0U.268-01
IMSA Prototype Class Scrutineering Logger
3 | Components
7 / 47