Ddu9; Pbx90 - Bosch IMSA Prototype Classes Scrutineering System Manual

3 | Components
6 / 47
3.2.1

DDU9

Functional Description: Logger and Marshalling Display for IMSA Prototype Class
Scrutineering System
Mounting Note:
This device must be fitted in the cockpit in an easily accessible IMSA

approved location.
This device must be mounted away from heat sources. Note maximum

temperature range below.
This device should be mounted so that the display can be easily seen by

the driver while on course.
This device should be mounted to sustain vibrations within the Vibration

Profile 1 defined in the appendix.
Brightness Control: Brightness must be commanded via CAN by a value of 1-6,
message details found in the DBC.
Part Number: F02U.V0U.249-01
Temperature Range: -20 to 70 °C
3.2.2

PBX90

Functional Description: Powerbox for IMSA Prototype Class Scrutineering System
Mounting Note:
This device must be fitted in the cockpit in an easily accessible IMSA

approved location.
This device must be mounted away from heat sources. Note maximum

temperature range below.
This device should be mounted so that the device can be easily accessed.

Part Number: F02U.V01.794-05
Temperature Range: -20 to 85 °C
IMSA Prototype Class Scrutineering Logger Bosch Motorsport