Vibration Profile 1 - Bosch IMSA Prototype Classes Scrutineering System Manual

 Add b_FFMService to team CAN received list
 Add lambda integral regulation channels to CAN list
 Update order form for 2019
 Updated DDU9 screenshots
 USB stick ownership reiterated
 Part number corrections in Component Table
 LT4 part number update to -09
 Add FFM time and fuel temp to CAN channels sent table 
Update nmot_imsa description in CAN channels sent table 
Sensor Declaration Form removed
 Laser ride height wording clarified
 Connector clarifications
 Added laser ride height sensor pinout
 Updated engine speed sensor pinout
 Updated information related to engine speed sensor
 Corrected Laser Ride Height Connector
 Modified engine speed sensor pinout and recommendation
 Added laser ride height, engine speed sensor, and fuel flow meter sections.
 Sensor use case reduced text (now see manufacturer homologation form)
 Updated display screens with rainlight.
 Harness layout drawing updated.
 Scope overview updated.
 IMSA supplied components marked.
 Vibration profile 1 added.
 Declaration form available online.
 Declaration sheet updated.
 Order form updated.
 DDU9 brightness range defined in main body.
 PBX90 mounting position clarified to in cockpit.
 Display Pages section added.
 CAN message Tables Removed.
 CAN channel Short Names updated.
 Team received CAN list added.
12 Revisions
V1.2.5
V1.2.4
V1.2.2
V1.2.0
V1.1.0
V1.0.2
V1.2.4
V1.2.3
V1.2.1