Advertisement
Figure 4
Top Frame Mounting Bolts and Nuts
Mounting
Nuts
• With handles facing up, place the main frame onto the
top frame. Align the holes in the main frame mounting
bracket with the top frame mounting bolts (Figure 5).
Figure 5
Handles
Facing Up
Top Frame
Mounting Bolts
• Slide the main frame until it is approximately 6-1/2" from
the end of the left side of the top frame (Figure 6).
• Use a 13 mm socket to snug the two top frame mounting
bolts. DO NOT tighten at this time.
Figure 6
Main Frame
1
2
3
Top Frame
•
• Assemble wheels and handle shown in the OWNERS
MANUAL
ASSEMBLE FEET
Refer to Figure 7
• Press the feet on to the end of each main frame leg.
Figure 7
Foot
Main Frame Leg
LEVEL TOP FRAME
Refer to Figure 8–9
• Roll the miter saw stand over to rest on the handle and
wheels as shown in Figure 4 of your Owner's Manual.
• Unfold the stand, refer to the Unfold the Miter Saw
Stand instructions in your Owner's Manual.
Bar Lock
Main Frame
Mounting Bracket
Mounting Bolts
4
5
6
7
8
9
10
NOTE: The crossbar clip will not be latched during
assembly of unit.
• Place a level on the on the top frame to ensure the miter
saw stand is level.
- If the top frame is level tighten the two top frame
mounting bolts.
- If the top frame is NOT level loosen the two top frame
mounting bolts and slide the top frame until it is level.
When level tighten the two top frame mounting bolts.
Figure 8
Top Frame
• Reassemble the bar lock as shown. DO NOT tighten the
mounting bolts at this time.
• Slide latch pin up to release table support bar bracket
and lower top frame as shown in Figure 13 under To
Fold Stand For Storage in your Owner's Manual.
• Position the bar lock with the extended foot touching the
down side of the cross bar.
• Use a 13 mm socket to tighten the bar lock nuts.
Figure 9
Top Frame
11
12
Extended Foot
Crossbar
WARNING
For your own safety, read all of the rules and precautions
before operating tool.
PLACE THIS SHEET WITH YOUR
MANUAL FOR FUTURE REFERENCE.
Bar Lock Nuts
Bar Lock
Visit us on the web at
www.southerntechllc.com
Put these instructions and the
original sales invoice in a safe,
dry place for future reference.
Southern Technologies, LLC
3816 Hawthorn CT,
Waukegan, IL 60087
Top Frame
Mounting Bolts
Bar Lock
Advertisement
