User Manual
IKORE B Transmitter
Charger and battery
BC70K status LEDs
Remote control battery charging tips
©
Danfoss | January 2019
The BC70K has an LED for each compartment (BAT 1 and BAT 2) and a common indicator (POWER).
Green LED; pulsing (BAT 1 and BAT 2)
Green LED; continuous (BAT 1 and BAT 2)
Red LED; pulsing or continuous (BAT 1 and BAT 2) Battery charger fault
Red LED; continuous (POWER)
The battery lifespan is estimated to be 500 recharging cycles and is largely dependent on the conditions
of use.
To maximize the lifespan of the batteries and battery charger, follow these tips:
•
Do not recharge the battery until needed, as shown with slow, red LED pulse on the transmitter
•
Always charge the batteries at temperatures between 0° and 45° C
•
Do not leave the battery charger or batteries in direct sunlight
•
Charge batteries at least once every six months
•
Avoid short circuits between the battery contacts; do not transport charged batteries in toolboxes or
next to other metal objects
•
Always keep contacts clean
The battery is charging
The battery is completely charged
Battery charger is properly connected to power
source
BC292582855621en-000101 | 9