Remove The Scsi Interface Pca(S) - HP StorageWorks 3800ux Conversion Manual

Convert an MO Jukebox to UDO or Mixed-Media Technology

Remove the SCSI interface PCA(s)

To remove the SCSI interface PCA(s):
1. Remove the SCSI interface PCA module(s) from the jukebox by removing the 2 screws
2. Remove all cables from the SCSI interface PCA module(s).
3. Remove the 6 T-15 screws that secure the SCSI interface PCA to the module.
4. Remove the SCSI interface PCA from the module.
5. If there is a second SCSI interface PCA, remove it as well.
6. Throw away all terminators (including the 68-pin terminators) from the obsolete SCSI
7. Discard or recycle the PCA(s).
1
2
Figure 3: SCSI interface PCA
20
Caution: Parts can be damaged by electrostatic discharge. Keep parts in their containers
until needed. Ensure you are properly grounded when touching static-sensitive components.
that secure it to the jukebox and pulling it from the jukebox frame.
interface PCA(s). New LVD SCSI terminators are required and are provided with the kits.
1
SCSI interface PCA
SCSI interface PCA module
4
3
2
Screws
3
Notch for internal cables to the module
4
3800ux/7100ux Optical Jukebox Conversion Guide
3
1
4