Remove Obsolete Cables - HP StorageWorks 3800ux Conversion Manual

Remove obsolete cables

Note:
To remove obsolete cables:
1. Remove and discard the GPIO cable, which runs from the controller board to the
2. Remove and discard the single-ended SCSI cable(s) that connected the interposer board(s)
3800ux/7100ux Optical Jukebox Conversion Guide
For both of these steps, see
interposer board(s) and to the SCSI interface module.
to the SCSI interface module.
Convert an MO Jukebox to UDO or Mixed-Media Technology
Figure 1 for cable locations.
21