Install And Reconnect Cables - HP StorageWorks 3800ux Conversion Manual

Install and reconnect cables

To install the new cables:
1. On the upper interposer board, connect the following cables:
2. Locate the 50-pin GPIO cable and position it so that the center polarizing keys face you,
3. Attach the cable connector to the controller board (see
1
2
3
Figure 10: 50-pin GPIO cable connections
3800ux/7100ux Optical Jukebox Conversion Guide
Upper path clear sensor cable
Front panel cable
Mailslot cable
and the interposer connectors are to the right.
5
6
4
7
Controller board
Upper interposer board
Lower interposer board
Convert an MO Jukebox to UDO or Mixed-Media Technology
Figure
1
2
3
50-pin GPIO cable
4
50-pin GPIO cable connected to controller board
5
50-pin GPIO cable connected to upper interposer
6
50-pin GPIO cable connected to lower interposer
7
10).
29