Table of Contents
Advertisement
CANADIAN CERTIFICATION
RSS APPROVALS
The MDS 4310 Transceiver has been approved for use in Canada under Radio Standards
Specification (RSS) 119 and 122 of Industry Canada (IC) certification. The frequency ranges
and channel spacings for this application are as follows:
RSS-119
Frequency Range:
Channel Spacing:
Power Output:
RSS-122
Frequency Range:
Channel Spacing:
Power Output:
RESTRICTIONS
The Industry Canada approval is valid subject to the restrictions listed below:
1.
The MDS 4310 may only be used with a built-in modem at speeds of either 1200,
4800 or 9600 bps. No external modems or other signaling devices using external
transmit audio input (Pin 9 of the
2.
The Order Wire Module (MDS P/N 02-1297A01) may not be used with the
transceiver.
MDS 05-2415A01, Rev. A
APPENDIX I
Transmit —406.1–430, 450–470 MHz
Receive —406.1–430, 450–470 MHz
25 kHz
1 to 5 watts, continuously variable
Transmit —406.1–430 MHz
Receive —406.1–430 MHz
12.5 kHz
1 to 5 watts continuously variable
INTERFACE
connector) are permitted.
I-1
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MDS 4310 and is the answer not in the manual?
Questions and answers