Rear Wheel Reassembly - Royal Enfield Himalayan BS IV 2018 Owner's Manual

MINOR MAINTENANCE TIPS

REAR WHEEL REASSEMBLY

Ensure the cush rubbers are in place in the wheel hub.

Insert the wheel assembly between the swing arms and position the cush rubbers on the rear

sprocket lugs correctly.
Remove the spacer between the brake pads and locate the caliper such that the brake disc is

between the brake pads.
Locate the caliper bracket slot on the lug in the swing arm.

Position the respective spacers on the left and right side of the wheel hub.

Ensure the axle mounting hole in the swing arm, wheel hub and caliper bracket are aligned.

Insert the wheel axle from the left side of the swing arm and gently tap it in.

82