Reassembly Of Battery On Motorcycle - Royal Enfield Himalayan BS IV 2018 Owner's Manual

MINOR MAINTENANCE TIPS
Remove the battery carrier bracket by loosening the hex bolt.

Remove the battery.

WARNING
Always disconnect the Black negative (-) battery cable first and then the Red positive (+) cable
while removing the battery connections.

REASSEMBLY OF BATTERY ON MOTORCYCLE

Position the battery in the battery carrier such that the terminals are facing inside.

Ensure ignition switch is in 'OFF' condition.

Connect the red wire to the positive terminal of the battery first.

Next, connect the black wire to the negative terminal of the battery.

Smear the terminals with petroleum jelly. (Do not use grease in the battery terminals).

88