Using Your Extractor - CDA CCA51 Installation, Use And Maintenance Manual

Using your extractor

For best performance, you should switch on the extractor 15 minutes
before starting to cook and leave it to run for approximately 15 minutes
after the end of cooking.
A - Light switch
B - Power indicator light
C - Power switch
Fig. 1
To switch the extractor light on or off
• Slide the light switch (A) to position '0' for off and '1' for on.
To switch on the extractor, or change the motor speed
• Slide the fan switch (C) to the position required dependent on the
speed you require. The red power indicator (B) should illuminate.
To switch the extractor off
• Slide the fan switch (C) to position '0' for off.
6
0 1
A B
0 1 2
C