CDA CCA51 Installation, Use And Maintenance Manual page 11

NOTE: USE A 3A FUSE
Assembly and electrical connection should be carried out by
competent personnel.
When installing this product we recommend you seek the help of
another (competent and qualified) individual.
Do not mount the isolation switch behind the extractor or in an
inaccessible place. It is a requirement that you must be able to isolate
the extractor from the mains electrical supply after installation.
This appliance is intended to be connected to the mains electrical
supply by means of an isolation switch and fused spur and is intended
to be protected by a 3A fuse. The use of a 13A fuse can cause
damage to the internal wiring and, in the event of a fault, and may also
invalidate the warranty.
11