Changing The Light - CDA CCA51 Installation, Use And Maintenance Manual

Changing the light

IMPORTANT: DO NOT PERFORM MAINTENANCE OR CLEAN-
ING OF THE EXTRACTOR WITHOUT FIRST SWITCHING OFF THE
ELECTRICITY SUPPLY.
DO NOT CHANGE THE LIGHT BULB IMMEDIATELY AFTER USE AS
THE BULB MAY BE HOT. ALLOW IT TO COOL BEFORE REMOVING
IT.
1. Unfasten the securing screws (S in Fig 2 on page 7) on either side
of the cover panel and the cover panel will come off. Take care not
to drop it.
2. Remove the faulty light bulb and replace with a light bulb no more
powerful than that specified on the rating plate (E14, SES, 5.5W
LED).
3. Replace the cover panel and refasten the sliding brackets.
Do not touch bulbs or adjacent areas during or straight after
prolonged use of the lights.
The light is designed for use during cooking and not for general room
illumination. Extended use of the light can reduce the life-span of the
bulb.
Bulb replacement is not covered by the guarantee.
Only use CE marked bulbs recommended for your extractor. Do not fit
bulbs of a higher power rating. Bulbs of a lower power rating may be
adequate for use, generally last longer, and use less energy.
Spare bulbs are available from CDA Customer Care.
9