Mounting Your Extractor (With Cutout Dimensions) - CDA CCA51 Installation, Use And Maintenance Manual

Mounting your extractor
The extractor can be mounted in one of two ways:
1. Mark out the dimensions of the cut-out based on your hood; the
dimensions required are as follows: -
Version
CCA51
CCA71
2. Hold the extractor in the housing and secure to the canopy using 4
wood screws, through holes located in the corners of the extractor.
These screw holes are shown in Figs. 3 & 5. We recommend that
you seek the help of another individual when carrying out this task.
302mm
Fig. 3
14
Cut-out Width Cut-out Depth
455 277
648 277
275mm
225mm
VIEW FROM TOP - CCA51
Ø 120mm
453mm
478mm
75mm