Advertisement
Universal Rapid Toaster
340-TCE
To connect toaster units, push the rear toaster unit
7
behind the front toaster unit, tilting the rear unit back
and raising the bun chute of the rear unit slightly so
that it slides over the BBLZ of the front unit.
Lift the Front Edge of the Bun Chute
So That It Slides Over the BBLZ
Your Universal Rapid Toaster may consist of a single chamber or may be composed of two independent toasting chambers
which, when positioned together, operate as one toaster. Each chamber has its own power switch and Control Panel.
A. Turn the On/Off switch(es) located below the control panel on the side of the unit(s) to ON. After 20 seconds, the unit(s) will
1
complete its internal setup, and the Control Panel screen will display OFF.
B. Wait for warm-up. This should take 15 minutes for muffins or bagels and 20 minutes for buns.
2
BURN/ELECTRICAL SHOCK HAZARD! Heating
elements are HOT and can cause severe burns or severe
shock! Keep hands and objects out of the toaster unit!
Failure to exercise caution may result in serious injury!
Turn the unit off, unplug it and let it cool down
completely before touching or working on internal
apparatus.
A. On the Control Panel, press the PRODUCT button to
select the desired bread product (i.e., bagel, muffin, bun).
The display shows the product selected.
B. Wait for warm-up. This should take 15 minutes for
muffins or bagels and 20 minutes for buns.
Printed in USA 3/06 © 2006
Installation (continued)
Operation
WARNING
8
All electrical connections must be in accordance with
local electrical codes and any other applicable codes.
A. Ensure that there are no wires or cords above the
unit.
B. Plug the unit into an applicable electrical
receptacle.
4
CAUTION
340-506-EN
Advertisement
