Advertisement
A. Push the BBLZ into position. The BBLZ is in the
5
correct position when the mounting holes on the
BBLZ align with the mounting holes on the toaster
unit.
B. Insert screws to hold BBLZ in position.
NOTE: If yours is a single unit, proceed to Step 10.
BBLZ Pushed Back into Position
Mounting Holes Align
340-506-EN
Installation (continued)
6
3
Universal Rapid Toaster
A. On the "rear" chamber, push the bun chute into the
toaster from the back toward the front, aligning the
bun chute with the mounting holes on the back of
the toaster unit.
B. Insert 2 screws into the back of the unit to hold the
bun chute into position.
C. Insert 2 screws into the inside walls at the front of
the chute.
Rear Mounting Screws
Front Mounting Screws
340-TCE
Printed in USA 3/06 © 2006
Advertisement
