Faults; Safety; Customer Care - Krautzberger MP-400 Operating Instructions Manual

Diaphragm pump
Table of Contents

Advertisement

9 Faults

9.1

Safety

Personnel:
n
Qualified personnel
Protective equipment:
The selection of the protective equipment depends on the medium used by the owner. The infor-
mation provided by the medium manufacturer indicated on the safety data sheet must be adhered
to in order to ensure the proper selection of protective equipment.
How to act in case of dangerous faults
In principle, the following applies:
1.
In the event of faults that pose an immediate risk to persons or material assets, switch off
the diaphragm pump immediately.
2.
Determine the cause of the fault.
3.
Inform the person responsible at the operating site about the fault.
4.
In the event that troubleshooting requires work in the hazard area, switch off the diaphragm
pump and secure it against a restart.
5.
Depending on the type of fault, eliminate the fault or have it eliminated by an authorised
specialist.
If the fault is not included in the following table or if it cannot be eliminated with the
measures described, contact Customer Care at Krautzberger GmbH.
9.2

Customer Care

Krautzberger GmbH
Customer service
Stockbornstr. 13
65343 Eltville am Rhein
+49 6123 698151
customercare@krautzberger.com
GB–34
Operating instructions
T-Dok-236-GB-Rev.3
mail@krautzberger.com, www.krautzberger.com

Advertisement

Table of Contents
loading

Table of Contents