Changing The Brightness Of Display - Yamaha Clavinova CVP-809 Owner's Manual

Changing the Brightness of Display

Here you can change certain display settings as desired, including brightness.
1
Call up the operation display (Utility) (step 1 on page 22).
2
Touch [Touch Screen/Display] on the display.
3
Change the settings by touching the display.
Touch
Screen
Brightness
For information on the other items in this display, refer to the "Utility" section in the Reference
Manual on the website (page 9).
Sound Determines whether or not touching the display will trigger the click
sound.
Calibration Lets you calibrate the display when it does not respond properly to
your touching (Normally, you do not need this operation, since it is
calibrated by factory default). Touch here to call up the Calibration
display, then touch the center of the plus marks (+) in order.
Screen Move the slider to adjust the brightness of the display.
Touch [L]/[R] to adjust the brightness of the button lamps on the
Button
Lamps control panel.
NOTE
The brightness of the guide lamps cannot be adjusted.
CVP-809/CVP-805 Owner's Manual
23